Difference between revisions of "Production Notes"

From Dreamwidth Notes
Jump to: navigation, search
(Memcached)
 
(22 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
[[Category: Production]]
 
[[Category: Production]]
  
This document is meant to be read by people with sysadmin experience. I'll go back at some point and clean it up, break it down into sections, etc.  But for now I'm just trying to dump as much information as possible so that Matthew and Robby have some state on how things are.
+
This document is for the Dreamwidth staff. Most of this won't work for you, but if you're curious, feel free to look. We host on AWS.
  
 
== Links ==
 
== Links ==
  
* Cacti: http://z.dreamwidth.org/cacti/
+
* Dashboard: https://app.datadoghq.com/dashboard/v8n-hrk-jgt/dreamwidth-health
* Nagios: http://z.dreamwidth.org/nagios3/
+
 
* Healthy?: http://www.dreamwidth.org/admin/healthy.bml
 
* Healthy?: http://www.dreamwidth.org/admin/healthy.bml
 
== Nagios ==
 
 
The Nagios setup is running on dfw-admin01 in /etc/nagios3, most of the configuration files are in /etc/nagios3/conf.d as you can imagine.  You can poke around if you want to change it, it's pretty straightforward.
 
 
If you do change things, you probably want to commit them to the operations repository.
 
 
    make your changes... etc etc
 
   
 
    $ sync-back-nagios
 
    $ cd /root/dw-ops/nagios/conf.d
 
    $ hg status
 
   
 
    if everything looks good, then:
 
   
 
    $ commit -a mark -m "Some commit message."
 
 
Replace mark with matthew or alierak as appropriate.
 
 
== Cacti ==
 
 
Most of the graphs are more or less useful.  I spend a lot of time looking at dfw-lb01 which shows all of the incoming site traffic.  In particular: eth0 is always the "Internet" interface, on all slices.  eth1 is the "Internal/Private" interface.  And lo is lo.
 
 
The only time lo is really interesting is on the dfw-lb01/dfw-lb02 machines.  Look at the SSL configuration to see why, but lo is the measure of how much SSL traffic we're doing.
 
  
 
== Traffic Flow ==
 
== Traffic Flow ==
  
This summarizes the flow of traffic.  There are a lot more sections that talk far more in depth about various things, but here you go...
+
Traffic looks like:
  
* Site external IP is on dfw-lb01 (or dfw-lb02), which runs Perlbal.
+
1. We use Cloudflare for some things (www, userpics, attachments, some high traffic domains).
* User connects to Perlbal. If it's a static request, it serves it locally. If it's dynamic, it hands off to a webserver.
+
2. AWS Cloudfront. Use this to configure caching and such.
* Perlbal connects to dfw-webXX and proxies the request.
+
3. AWS WAF. Use this to configure mitigations against bad actors or things.
* Webservers connect to lots of things: databases, memcache, mogilefsd, gearmand, etc.
+
4. AWS Application Load Balancer. Use this to route traffic to different internal endpoints.
* Response is returned.
+
5. Destination instance(s).
  
That's the basic flow of things and what connects to what.  There's a separate flow that happens when the user requests a userpic (or any other MogileFS resource, but for now it's just userpics).
+
It's hard to say what #5 is since it varies depending on the request. In general though, it hits one of our EC2 instances which handles the request.
 
+
* User -> Perlbal, "GET /userpic/XXXX/YYY"
+
* Perlbal -> Webserver, "GET /userpic/XXXX/YYY"
+
* Webserver replies: X-REPROXY-URL: http://dfw-mog01/dev1/0/00/000/234.fid
+
* Perlbal -> dfw-mog01, "GET /dev1/..."
+
* Mogile storage node replies with image
+
* Perlbal munges headers from webserver original reply, plus body of image from mogile storeage node, returns that to the user.
+
 
+
SSL is different again:
+
 
+
* User -> Pound.
+
* Pound handles the SSL handshake and decryption/encryption.
+
* Pound connects to localhost:80 (Perlbal).
+
* Same process now as originally.
+
 
+
== Perlbal ==
+
 
+
Perlbal is the main software load balancer.  With the Dreamwidth configuration, it doesn't do terribly much except handle reproxying.
+
 
+
* Runs on: dfw-lb01, dfw-lb02
+
* Admin port: 60000
+
 
+
Nagios is setup to monitor HTTP and SSL on these machines, not necessarily the admin port though.  (That could be useful.)
+
 
+
=== Start/Restart ===
+
 
+
If Perlbal happens to crash or otherwise become unavailable, you can start/restart it.
+
 
+
    run as root on dfw-admin01
+
    $ bin/restart-perlbal
+
 
+
=== Health Checking ===
+
 
+
Kareila made a script for doing status checks on the perlbals.  You can run it like this:
+
 
+
    [dw @ dfw-admin01 - ~/current] -> bin/pbadm 1
+
    Name "LJ::PERLBAL_SERVERS" used only once: possible typo at bin/pbadm line 37.
+
    Tue May 19 05:44:52 2009: [lb01 - 003, 0000] [lb02 - 000, 0000]
+
    Tue May 19 05:44:53 2009: [lb01 - 001, 0000] [lb02 - 000, 0000]
+
    Tue May 19 05:44:54 2009: [lb01 - 004, 0000] [lb02 - 000, 0000]
+
 
+
Ignore the warning.  These lines should be color coded: green is okay, yellow is intriguing, red is problematic.  But generally as long as the numbers look pretty low, it should be alright.  (Unless it says DOWN of course...)
+
 
+
== MogileFS ==
+
  
 
== Gearman ==
 
== Gearman ==
Line 96: Line 27:
 
* Port: 7003
 
* Port: 7003
  
There is no administrative port.  I think there are some commands you can use to see how deep the queues are, but I don't know off the top of my head.  We use gearman for only one thing right now (userpic resizes?) so I can't imagine it falling behind.
+
There is no administrative port.  I think there are some commands you can use to see how deep the queues are, but I don't know off the top of my head.  We use gearman for only one thing right now (userpic resizes? directory searches?) so I can't imagine it falling behind.
  
 
=== Start/Restart ===
 
=== Start/Restart ===
  
 
This is manual, I have no tool to do it.  SSH to the servers that run gearman and use the <tt>/etc/init.d/gearman-server</tt> script.
 
This is manual, I have no tool to do it.  SSH to the servers that run gearman and use the <tt>/etc/init.d/gearman-server</tt> script.
 +
 +
=== Dreamhacks ===
 +
See [[Setting up Gearman]]
  
 
== Memcached ==
 
== Memcached ==
Line 123: Line 57:
  
 
== TheSchwartz ==
 
== TheSchwartz ==
 +
 +
There's not much to mention here.  The actual work is done by workers, which is in the Workers section of this document.  TheSchwartz database is maintained on the global database (see Databases section).  Logical db name is <tt>dw_schwartz</tt>.
  
 
== Workers ==
 
== Workers ==
 +
 +
The workers do async tasks that we don't need to happen inline with someone doing something on the website.  Okay, so I lied, some workers actually are synchronous (thinking of the Gearman things here).
 +
 +
* Runs on: dfw-jobs01, dfw-jobs02
 +
 +
There is no port or management for these, they're just tasks.  Typically speaking, you can see if they're running by looking at ps on the machine.
 +
 +
=== Start/Restart ===
 +
 +
Second verse...
 +
 +
    as root on dfw-admin01
 +
    $ bin/restart-jobs
 +
 +
CAVEAT LECTOR: Restarting the workers can be hard on the content-importer workers, since they allocate 12 hours to process entry and comment imports.  If you restart workers while an import is in progress, it will cause that user's import to effectively pause halfway for 12 hours until it gets retried later.
 +
 +
There is no current way around this.  You just have to know when is a good time to restart workers.  While I'm gone, if you need to restart them, just do it.  If a user has a problem with a delayed import, support will be awesome and let them know that it might take a while.
 +
 +
If you want to check on the importers...
 +
 +
    [root @ dfw-admin01 - ~] -> bin/importer-status
 +
    dfw-mail01
 +
    4084 ?        S      2:11 content-importer [bored]
 +
    dfw-jobs01
 +
    5663 ?        S      4:29 content-importer [bored]
 +
    25034 ?        S      0:05 content-importer [bored]
 +
    dfw-jobs02
 +
    28323 ?        S      0:04 content-importer [bored]
 +
    28528 ?        S      0:05 content-importer [bored]
 +
 +
Note they're all bored.  That means you are safe to just restart the workers.  On the other hand, if it says it's posting entries or comments, you might want to wait.  (But if it's an emergency, just do it.)
  
 
== Incoming Mail ==
 
== Incoming Mail ==
 +
 +
The machine dfw-mail01 handles incoming mail.  It's a postfix system, with the MySQL module so that it can handle mail aliases/forwarding for users.
 +
 +
Sorry this is lacking in detail.  If you're familiar with postfix you can dig around /etc/postfix for some more information.  Specifically the /etc/postfix/dw directory.
  
 
== Outgoing Mail ==
 
== Outgoing Mail ==
 +
 +
Amazon SES is our outgoing mail provider. You can use the AWS dashboards if needed.
  
 
== Databases ==
 
== Databases ==
 +
 +
We use Amazon RDS and operate on the Aurora database technology. This is basically MySQL but it automates things like leader elections/follower promotions, backups, etc.
  
 
== Webservers ==
 
== Webservers ==
  
== SSL ==
+
Serves web requests.  Pretty straightforward.
 +
 
 +
* Runs on: va-web{01,02,03,04,05,06}
 +
 
 +
=== Start/Restart ===
 +
 
 +
You're probably used to this by now.  There is a handy tool to do the restarts, but this one lets you give it a "delay".  If you have an emergency, and need to restart everything, you can just run the command with a 0 argument.
 +
 
 +
    run as root on va-admin01
 +
    $ bin/restart-webs 5
 +
 
 +
That restarts the webservers with a 5 second delay.  If you don't specify a delay, 5 seconds is used presently.
 +
 
 +
== ddlockd ==
 +
 
 +
This is a very damn simple locking daemon.
 +
 
 +
* Runs on: dfw-jobs01, dfw-jobs02
 +
* Port: 7002
 +
 
 +
=== Start/Restart ===
 +
 
 +
Given that it's a locking system, it won't actually restart.  The following command will start them up if they're down, that's it:
 +
 
 +
    run as root on dfw-admin01
 +
    $ bin/restart-ddlockd
 +
 
 +
=== Status ===
 +
 
 +
You can telnet to the port and issue the command <tt>status</tt> to see what's going on.  It's a little terse.

Latest revision as of 03:33, 7 November 2021


This document is for the Dreamwidth staff. Most of this won't work for you, but if you're curious, feel free to look. We host on AWS.

Links

Traffic Flow

Traffic looks like:

1. We use Cloudflare for some things (www, userpics, attachments, some high traffic domains). 2. AWS Cloudfront. Use this to configure caching and such. 3. AWS WAF. Use this to configure mitigations against bad actors or things. 4. AWS Application Load Balancer. Use this to route traffic to different internal endpoints. 5. Destination instance(s).

It's hard to say what #5 is since it varies depending on the request. In general though, it hits one of our EC2 instances which handles the request.

Gearman

Very simple server that just handles jobs. If this goes down, it should be started back up.

  • Runs on: dfw-jobs01, dfw-jobs02
  • Port: 7003

There is no administrative port. I think there are some commands you can use to see how deep the queues are, but I don't know off the top of my head. We use gearman for only one thing right now (userpic resizes? directory searches?) so I can't imagine it falling behind.

Start/Restart

This is manual, I have no tool to do it. SSH to the servers that run gearman and use the /etc/init.d/gearman-server script.

Dreamhacks

See Setting up Gearman

Memcached

These generally stay up and never give any trouble. They store data, it's basically a LRU cache. We don't push them that hard right now -- you can find all of the basic information in Cacti, I setup a nice memcached graphing library with interesting stats.

  • Runs on: dfw-memc01, dfw-memc02
  • Port: 11211

Start/Restart

Same as for Perlbal:

   as root on dfw-admin01
   $ bin/restart-memcache

KEEP IN MIND: Restarting memcache puts a heavy strain on the databases. While we can get away with it without any trouble right now (our databases are bored), at some point in the future restarting memcache will become synonymous with shooting the site in the knee and watching it hobble along.

Admin Stats

If you want the nitty gritty you can telnet to one of the instances on the port above and type stats which will give you a nice dump.

TheSchwartz

There's not much to mention here. The actual work is done by workers, which is in the Workers section of this document. TheSchwartz database is maintained on the global database (see Databases section). Logical db name is dw_schwartz.

Workers

The workers do async tasks that we don't need to happen inline with someone doing something on the website. Okay, so I lied, some workers actually are synchronous (thinking of the Gearman things here).

  • Runs on: dfw-jobs01, dfw-jobs02

There is no port or management for these, they're just tasks. Typically speaking, you can see if they're running by looking at ps on the machine.

Start/Restart

Second verse...

   as root on dfw-admin01
   $ bin/restart-jobs

CAVEAT LECTOR: Restarting the workers can be hard on the content-importer workers, since they allocate 12 hours to process entry and comment imports. If you restart workers while an import is in progress, it will cause that user's import to effectively pause halfway for 12 hours until it gets retried later.

There is no current way around this. You just have to know when is a good time to restart workers. While I'm gone, if you need to restart them, just do it. If a user has a problem with a delayed import, support will be awesome and let them know that it might take a while.

If you want to check on the importers...

   [root @ dfw-admin01 - ~] -> bin/importer-status
   dfw-mail01
    4084 ?        S      2:11 content-importer [bored]
   dfw-jobs01
    5663 ?        S      4:29 content-importer [bored]
   25034 ?        S      0:05 content-importer [bored]
   dfw-jobs02
   28323 ?        S      0:04 content-importer [bored]
   28528 ?        S      0:05 content-importer [bored]

Note they're all bored. That means you are safe to just restart the workers. On the other hand, if it says it's posting entries or comments, you might want to wait. (But if it's an emergency, just do it.)

Incoming Mail

The machine dfw-mail01 handles incoming mail. It's a postfix system, with the MySQL module so that it can handle mail aliases/forwarding for users.

Sorry this is lacking in detail. If you're familiar with postfix you can dig around /etc/postfix for some more information. Specifically the /etc/postfix/dw directory.

Outgoing Mail

Amazon SES is our outgoing mail provider. You can use the AWS dashboards if needed.

Databases

We use Amazon RDS and operate on the Aurora database technology. This is basically MySQL but it automates things like leader elections/follower promotions, backups, etc.

Webservers

Serves web requests. Pretty straightforward.

  • Runs on: va-web{01,02,03,04,05,06}

Start/Restart

You're probably used to this by now. There is a handy tool to do the restarts, but this one lets you give it a "delay". If you have an emergency, and need to restart everything, you can just run the command with a 0 argument.

   run as root on va-admin01
   $ bin/restart-webs 5

That restarts the webservers with a 5 second delay. If you don't specify a delay, 5 seconds is used presently.

ddlockd

This is a very damn simple locking daemon.

  • Runs on: dfw-jobs01, dfw-jobs02
  • Port: 7002

Start/Restart

Given that it's a locking system, it won't actually restart. The following command will start them up if they're down, that's it:

   run as root on dfw-admin01
   $ bin/restart-ddlockd

Status

You can telnet to the port and issue the command status to see what's going on. It's a little terse.